Table of Contents
Advertisement
Figure 36
Attach One Hinge Bolt to Each Side of the Router
1
2
5.
Attach the six remaining sets of hardware to each side of the bracket and router (3 sets on each side), as shown in
Figure 37 on page
6.
Use a socket wrench to evenly tighten all four bolts, using 6-7 foot-pounds of torque.
Figure 37
Attach Remaining Bolts to Bracket and Router
Install the Optional Security Panel
The Cisco includes an optional security panel. See
unauthorized users from removing the router from the mounting bracket, and also prevents unauthorized access to the
SD Card Slot (see
SD Card Slot Access for Bracket-Mounted Routers, page
63.
Mounting Bracket Kit, page
68).
63
51. The security panel prevents
Advertisement
Table of Contents
