Mounting Bracket Kit - Cisco CGR 1240 Mounting Instructions

Figure 23 Pole Mount Kit Contents
Item Name
1 Mounting plate
2 Clamp brackets
Included Hardware
3 Washer (3/8 inch)
4 Split lock washer (3/8 inch)
5 Nut (3/8-16)
6 Carriage bolt (3/8-16 x 7 inches)

Mounting Bracket Kit

Use the mounting bracket kit if you require a Cisco mounting bracket. The mounting bracket attaches to the mounting
plate, and then the router is installed on the mounting bracket.
Note: You can optionally use any compatible mounting bracket with the Cisco pole mount kit. Check with your authorized
Cisco reseller for compatible mounting brackets. See
1
Included Hardware
3 4
Qty 4 Qty 4
Qty.
1
2
4
4
4
4
2
5
Qty 4
Description
Install mounting plate on pole. Mounting bracket attaches to
mounting plate.
Use the clamp brackets to install the mounting plate on a pole.
Use the included hardware to attach the mounting plate to the pole,
as described in Install the Mounting Plate onto a Pole, page
Pole Mount Kit, page 50
51
6
Qty 4
54.