Table of Contents
Advertisement
Wall-Mount Height
Mount the router at a height where you can view the top of the module-side panel, and at which the cables can be
managed without adding stress to the router ports.
Wall-Mount Hardware Distance
Mount any reinforcement hardware that you provide to the wall the correct distance apart so that when the bolts are
installed through the mounting bracket wall mount holes (Item 1,
wall.
Figure 42
Distance for Wall-Mounting Hardware
Required Materials
Mounting bracket. For bracket dimensions, see
Socket wrench that you supply
5/16th-in. or M8 bolts or equivalent (5) (customer supplied)
Bolt reinforcement hardware (for example, wall shoe anchor bolts) (5) (customer supplied)
1.
Place the mounting bracket onto the location on the wall. Mark the locations of the four mounting holes and the one
center hole.
2.
(If Required) Install the bolt reinforcement hardware onto the wall at the five hole locations.
3.
Install the bolt into the center hole location. Do not fully thread in; leave bolt extended about 1/4".
Figure 42 on page
Figure 42 on page 67
and
67
67), they align with the holes in the
Figure 43 on page
68.
Advertisement
Table of Contents
