End Testing - Agilent Technologies Medalist x6000 Operator Instructions Manual

Figure 8: Inspection in process
End Test End Testing
End End Test Test
Figure 9: Stop testing pop-up
N7280 N7280- - - - 90011 N7280 N7280 90011 90011 – – – – Rev A 90011 Rev A Rev A Rev A
When the inspection is finished, the panel will
automatically be unloaded and the system will wait for
the panel to be removed from the machine.
4 4 4 4
After the panel is removed, continue repeating steps 2
and 3 until testing is complete.
ing
ing ing
To exit the Medalist x6000 user interface:
1 1 1 1 Press Cancel at the serial number prompt.
2 2 2 2 Press Yes when asked if you want to abort (see Figure
9).
8
Operator Instructions Operator Instructions Operator Instructions Operator Instructions