Ray Safety - Agilent Technologies Medalist x6000 Operator Instructions Manual

7 7 7 7 X X X X - - - - Ray Safety

Ray Safety

Ray Safety Ray Safety
This product produces X This product produces X- - - - rays. Do not attempt to open or modify any part of the product. Do not This product produces X This product produces X
WARNING
operate this product or turn on the X operate this product or turn on the X operate this product or turn on the X operate this product or turn on the X- - - - ray source unless all shielding is in place. Operation without
shielding in place can result in exposure to X shiel shiel shiel
Refer all servicing to service Refer all servicing to service Refer all servicing to service- - - - trained personnel. Refer all servicing to service
Do not, for ANY Do not, for ANY Do not, for ANY reason, attempt to defeat the built Do not, for ANY
WARNING
Safety Interlock Subsystem functional can result in exposure to X- - - - rays Safety Interlock Subsystem functional can result in exposure to X Safety Interlock Subsystem functional can result in exposure to X Safety Interlock Subsystem functional can result in exposure to X
components. Exposure to X components components components
death death death death. Contact with high voltage can cause electrical sho
death. Refer death. death. death.
Consult the Consult the Consult the Consult the Agilent Technologies Service Center
WARNING
the X the X- - - - ray Subsystem.
the X the X
Agilent recommends an x- - - - ray safety test be performed under the following conditions: Agilent recommends an x Agilent recommends an x Agilent recommends an x
WARNING
every six (6) months, every six (6) months, every six (6) months, every six (6) months,
•
•
•
shielding, the X- - - - ray shielding, the X
shielding, the X shielding, the X
Do not operate this equipment without complying to these recommendations. Do not operate this equipment without complying to these recommendations. Do not operate this equipment without complying to these recommendations. Do not operate this equipment without complying to these recommendations.
Verify that the X Verify that the X Verify that the X Verify that the X- - - - ray
WARNING
connection on the X- - - - ray connection on the X connection on the X connection on the X
supplied by the high voltage cable and the X supplied by the high voltage cable and the X supplied by the high voltage cable and the X- - - - ray supplied by the high voltage cable and the X
Do not drill or modify the shielding panels in ANY way. Do not drill or Do not drill or Do not drill or
WARNING
If X If X- - - - ray shielding is removed from the product or disturbed for any reason, the product must not If X If X ray shielding is removed from the product or disturbed for any reason, the product must not ray shielding is removed from the product or disturbed for any reason, the product must not
WARNING
be operated until the shielding is reinstalled and an X- - - - ray safety test (survey) is perf be operated until the shielding is reinstalled and an X be operated until the shielding is reinstalled and an X be operated until the shielding is reinstalled and an X
trained personnel trained personnel trained personnel trained personnel
Do not place any Do not place any Do not place any strong magnets near the X Do not place any
CAUTION
placed immediately at the position of the deflection coils could cause the electron beam to hit placed immediately at the position of the deflection coils could cause the electron beam to hit placed immediately at the position of the deflection coils could cause the electron beam to hit placed immediately at the position of the deflection coils could cause the electron beam to hit
the side of the X the side of th the side of th the side of th
additional radiation will be emitted from the system. However, proper operation of the machine additional radiation will be emitted from the system. However, proper operation of the machine additional radiation will be emitted from the system. However, proper operation of the machine additional radiation will be emitted from the system. However, proper operation of the machine
may may not be possible in a strong magnetic field. may may
Do not apply pressure to, modify or damage the X- - - - ray vacuum window. The X Do not apply pressure to, modify or damage the X Do not apply pressure to, modify or damage the X Do not apply pressure to, modify or damage the X
CAUTION
supports the tungsten target material. If the X- - - - ray vacuum window is broken, the X supports the tungsten target material. If the X
supports the tungsten target material. If the X supports the tungsten target material. If the X
cease to operate. cease to operate.
cease to operate. cease to operate.
Rev. A Rev. A Rev. A Rev. A
rays. Do not attempt to open or modify any part of the product. Do not rays. Do not attempt to open or modify any part of the product. Do not rays. Do not attempt to open or modify any part of the product. Do not
ding in place can result in exposure to X- - - - rays which can cause serious bodily injury or death. ding in place can result in exposure to X ding in place can result in exposure to X
trained personnel. trained personnel. trained personnel.
reason, attempt to defeat the built- - - - in safety interlocks. Operati reason, attempt to defeat the built reason, attempt to defeat the built
. Exposure to X- - - - rays . Exposure to X . Exposure to X rays and moving components rays rays and moving components can cause serious bodily injury and moving components and moving components
. Contact with high voltage can cause electrical shock resul . Contact with high voltage can cause electrical sho . Contact with high voltage can cause electrical sho
Refer all all all all servicing to service Refer Refer servicing to service servicing to service- - - - trained personnel. servicing to service
Agilent Technologies Service Center Agilent Technologies Service Center Agilent Technologies Service Center before attempting to service any components of
ray Subsystem.
ray Subsystem. ray Subsystem.
ray safety test be performed under the following conditions: ray safety test be performed under the following conditions: ray safety test be performed under the following conditions:
when the Medalist x6000 is installed at a site, when the Medalist x6000 is installed at a site, when the Medalist x6000 is installed at a site, when the Medalist x6000 is installed at a site,
when the Medalist x6000 has been moved, when the Medalist x6000 has been moved,
when the Medalist x6000 has been moved, when the Medalist x6000 has been moved,
immediately following maintenance that involves the Safety Interlock Subsystem, the lead immediately foll owing maintenance that involves the Safety Interlock Subsystem, the lead
immediately foll immediately foll owing maintenance that involves the Safety Interlock Subsystem, the lead owing maintenance that involves the Safety Interlock Subsystem, the lead
ray t t t t ube, or the HVPS. ube, or the HVPS.
ray ray ube, or the HVPS. ube, or the HVPS.
ray ray ray tube tube has an exter tube tube has an external green ground wire going directly to the ground has an exter has an exter
ray ray ray h h h h igh voltage power supply. This safety ground is in addition to the ground igh voltage power supply. This safety ground is in addition to the ground igh voltage power supply. This safety ground is in addition to the ground igh voltage power supply. This safety ground is in addition to the ground
modify the shielding panels in ANY way. modify the shielding panels in ANY way. modify the shielding panels in ANY way.
ray shielding is removed from the product or disturbed for any reason, the product must not
strong magnets near the X- - - - ray t strong magnets near the X strong magnets near the X
e X e X e X- - - - ray tube. The entire X ray tube. The entire X ray tube. The entire X- - - - ray t ray tube. The entire X
not be possible in a strong magnetic field. not be possible in a strong magnetic field. not be possible in a strong magnetic field.
ray source unless all shielding is in place. Operation without ray source unless all shielding is in place. Operation without ray source unless all shielding is in place. Operation without
rays which can cause serious bodily injury or death. rays which can cause serious bodily injury or death. rays which can cause serious bodily injury or death.
in safety interlocks. Operation without the in safety interlocks. Operati in safety interlocks. Operati
rays rays rays, , , , high voltage
can cause serious bodily injury or or or or can cause serious bodily injury can cause serious bodily injury
ck resul ck resulting in serious bodily injury or ck resul ting in serious bodily injury or ting in serious bodily injury or ting in serious bodily injury or
trained personnel. trained personnel. trained personnel.
before attempting to service any components of before attempting to service any components of before attempting to service any components of
nal green ground wire going directly to the ground nal green ground wire going directly to the ground nal green ground wire going directly to the ground
ray tube ray ray tube tube Mount. tube Mount. Mount. Mount.
ray safety test (survey) is perf ray safety test (survey) is performed by ray safety test (survey) is perf
ray t ray tube. Any magnets stronger than 50 gauss ray t ube. Any magnets stronger than 50 gauss ube. Any magnets stronger than 50 gauss ube. Any magnets stronger than 50 gauss
ray tube is shielded in the ray t ray t ube is shielded in the ube is shielded in the Medalist x6000 ube is shielded in the Medalist x6000 System, so, no Medalist x6000 Medalist x6000
ray vacuum window. The X- - - - ray vacuum window ray vacuum window. The X ray vacuum window. The X
ray vacuum window is broken, the X- - - - ray
ray vacuum window is broken, the X ray vacuum window is broken, the X
Legal Notices, Warranty and Safety Legal Notices, Warranty and Sa Legal Notices, Warranty and Sa Legal Notices, Warranty and Sa
xiv xiv xiv xiv
on without the on without the on without the
high voltage high voltage, or moving high voltage , or moving , or moving , or moving
ormed by ormed by ormed by
System, so, no System, so, no System, so, no
ray vacuum window ray vacuum window ray vacuum window
ray tube tube will will
ray ray tube tube will will
fety fety fety