LED status
Flashing green
Steady yellow
Flashing yellow
Off
SFP28 port LED
Table5-4 SFP28 port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off
SFP+ port LED
Each SFP+ port has a status LED to show port operating status and activities.
Table5-5 SFP+ port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow (3 Hz)
Off
1/10GBase-T autosensing Ethernet port LEDs
Table5-6 Description for 1/10GBase-T autosensing Ethernet port LEDs
LED status
Steady green
Flashing green
Steady yellow
Description
The port is sending or receiving data at 40 Gbps.
A transceiver module or cable has been correctly installed. The port has a link
and is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
No transceiver module or cable has been installed or no link is present on the
port.
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at the maximum speed.
The port is sending or receiving data at the maximum speed.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at a speed lower than the maximum speed.
The port is sending or receiving data at a speed lower than the maximum speed.
No transceiver module or cable has been installed or no link is present on the port.
Description
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Description
The port has a link and is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
The port has a link and is operating at 1 Gbps.
5-49