Table of Contents
Advertisement
Physical installation stand alone cooler
Image 5-25
4.
Fixate the bracket situated to the backside of the cooler housing with only one screws (M5x8) each.
Image 5-26
5.7 Insert the cooler units
Required tools
Flat screwdriver
Before you start
Check if the two indicated screws (reference 1) are present. If it is the case, remove this screws.
The use of these screws may become necessary to fixate the cooler in the cooler assembly when the captive
screws (reference 2) does not work.
R5906897 /02
Prometheus III
57
Advertisement
Table of Contents
