Table of Contents
Advertisement
Physical installation stand alone cooler
Image 5-23
1
cooler housing
2
Frame
3
cooler inputs
2.
Fixate the first U-bracket to the frame with 2 screws (M5x8) as shown in the following drawing.
Note: The two U-Brackets are not fixed in same manner. Here, the concerned U-bracket, is situated in the
lower left corner of the housing when you look at the device on the side of the cooler inputs.
Image 5-24
3.
Fixate the second U-bracket to the frame with only one screws (M5x8) as shown in the following drawing.
There is a space of more or less 2 centimeters between the frame side and the bracket.
Note: The two U-Brackets are not fixed in same manner. Here, the concerned U-bracket, is situated in the
lower right corner of the housing when you look at the device on the side of the cooler inputs.
56
R5906897 /02
Prometheus III
3
2
1
3
Advertisement
Table of Contents
