Physical installation stand alone cooler
8
Middle bracket
9
Front plate
overview:
8
9
Image 5-9
Required tools
•
Allen wrench 2.5 mm
•
Allen wrench 3 mm
First, turn all the screws in the inserts before starting to assemble.
Into the drawings used in this procedure, orientation of the unit is indicative. Don't hesitate to
change the unit orientation to facilitate the mounting of parts. By example, it could be more easy to
lay flat the front plate upon the table when you installing the both side covers.
How to assemble
1.
Insert the side fixation on both side covers. Slide it in for about 4 cm.
Make sure you insert the side fixation for the left side cover on the opposite side.
Turn in a set screws (M3) on each side but do not fasten it yet.
46
R5906897 /02
Prometheus III
2
1
5