Table of Contents
Advertisement
Maintenance
Clean the dust filter
1.
Remove most contamination with a vacuum cleaner in an other room or outside.
2.
Blow remaining dust away with compressed air in an other room or outside.
These dust filters are fragile. Clean them gently!
Mount the dust filters
1.
Insert the dust filter with the handle upwards. Small filter at the back, big filter at the front.
2.
Push the filters completely in until they click into position.
3.
Reinstall the side cover.
13.3 Check the cooler dust filters
How to check
1.
Remove both fixation screws (captive screws) and take off the cover plate.
Image 13-5
2.
Slide out the filter.
Image 13-6
3.
Check the "air in" side of the dust filter for dust and/or grease.
In case the filter is contaminated with grease wash and dry the dust filter. See cleaning procedure "Washing
and drying the dust filters", page 157.
In case the filter contains dust but doesn't feel greasy then clean these filters with compressed air. These
filters are not fragile and this method is more easier.
156
R5906897 /02
Prometheus III
1
Advertisement
Table of Contents
