Image 5-21
2.
Fixate the rear brackets to the backside of the cooler housing with 2 screws (M5x8) each.
Image 5-22
5.6 Mounting the cooler housing on the frame
Required parts
•
Cooler housing already assembled
•
Frame
•
5 Hex Screws M5x8
At this step of the procedure, the frame is considered as being in its final position, and already fixed,
if the wall mounting option has been chosen. See chapter dedicated to the standalone frame
preparation.
How to mount
1.
Place the housing on the frame.
Physical installation stand alone cooler
R5906897 /02
Prometheus III
55