Physical installation projector
A
2
Image 4-10: UPS connection
3.
Secure the UPS inlet socket with a fixation spring. Handle as follow:
•
Squeeze the fixation spring together.
•
Slide the fixation spring on the fixation pins while squeezing together and push it against the power plug.
•
Release the fixation spring.
4.
Install on the power outlet the second fixation spring to prevent losing it (2).
CAUTION: The electrical connection with the UPS INLET socket of the projector must be done with
a certified AC power supply cord (minimum 0,75 mm² or 18 AWG and minimum 300V)
CAUTION: Do not use the power OUTLET socket of the projector to provide power to other
equipment!
40
R5906897 /02
Prometheus III
B
1