Table of Contents
Advertisement
Physical installation stand alone cooler
Image 5-3
A Stack of cooler positioned on their sides may be considered, but in this case, the direction of the entire
coolers need to be the same, in order to forcing air flow in the same direction.
Image 5-4
Note: This positioning must be secularized with an adapted structure.
•
Wall mounting: When this option is chosen, the cooler must be fixed on the wall in portrait mode or in
landscape mode.
In portrait mode, the cooler must be mounted with the cooling tubes up. The other position (cooling tubes
down) is not authorized because coolers are heavy (more or less 15kg) and if the safety clic fails and the
cooler screw is not fixed, the cooler will simply fall to the ground! In this orientation it is also less practical to
remove a cooler for service.
R5906897 /02
Prometheus III
43
Advertisement
Table of Contents
