Table of Contents
Advertisement
11.2.2
SITOP DC UPS module
The UPS module backs up the power supply for the SIMOTION P using a lead accumulator
module. The back-up time of the battery is several minutes. This gives the user sufficient
time to shut-down the SIMOTION P in an orderly fashion.
Figure 11-3
There are DIP switches on the UPS module for setting the accumulator switching threshold,
the end-of-charge voltage, the charging current, and the buffering time.
More detailed information about the SITOP DC UPS module is available in the
documentation supplied with the device.
The UPS module uses the USB data interface to forward information to the SIMOTION P;
this can subsequently be displayed with the UPS monitoring application.
Figure 11-4
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
Connection of the UPS system / schematic display
Power supply overview
Spare parts/Accessories
11.2 UPS system
131
Advertisement
Table of Contents
