Table of Contents
Advertisement
2. Connect the two flat cables K1 and K2, along with the USB cable on the panel front, to
Figure 5-4
3. Attach the remote module to the panel front and hook the fastening hooks to the second
4. Fasten the remote module to the SIMOTION panel front with four screws.
See also
Interface description for the Panel PC Remote Kit (Page 66)
Accessories for the Panel PC Remote Kit (Page 68)
Panels interface description (Page 58)
Connection components (Page 37)
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
the remote module. Only use the white sockets and the USB socket as illustrated below.
Interfaces for the connection of the SIMOTION panel front
side.
Figure 5-5
Ready-mounted remote module on the SIMOTION panel front
Installing/Mounting
5.4 Distributed configuration
87
Advertisement
Table of Contents
