Note
The device is delivered with deactivated EWF (Enhanced Write Filter).
After commissioning the device, activate the EWF for drive C; this ensures the following:
An extended service life for the CF card
No data loss when switching the device off via the line side switch or through
The electronic components on the PCBs are highly sensitive to electrostatic discharge.
Always take appropriate precautionary measures when handling these components. Refer
to the directives for handling components that are sensitive to electrostatic charge. ESD
guidelines (Page 141).
Opening the module receptacle
To open the module receptacle, turn the
cover plate
180 degrees counter-clockwise.
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
disconnection from the power supply
CAUTION
①
of the module receptacle
5.2 Installing/removing an accessible CompactFlash card
Installing/Mounting
81