Table of Contents
Advertisement
Spare parts/Accessories
11.2 UPS system
11.2
UPS system
11.2.1
UPS system overview
When the power supply of the UPS system fails or is switched off, the UPS system continues
to provide the supply voltage to the SIMOTION P for several minutes. The user can
configure the system so that Windows, and thus also the SIMOTION Kernel, can be closed
down correctly.
The required values (accumulator switching threshold, end-of-charge voltage, backup
times, etc.) are set using DIP switches on the SITOP DC UPS module. Further informationen
on this can be found in the Operating Instructions for your DC-UPS module.
Note
If the SIMOTION P is usually switched off before Windows is correctly shut down, the use of
a UPS system is strongly advised.
Otherwise, there is a risk of the Windows installation sustaining damage, and it may no
longer be possible to execute SIMOTION P.
Figure 11-2
130
SITOP DC UPS module with accumulator module
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
Advertisement
Table of Contents
