Siemens SIMOTION P320-3 Manual page 78

Installing/Mounting
5.1 Installing SIMOTION P320-3
Mounting brackets on the device
Two mounting brackets are included in the device package. They can be attached to the
device with four screws supplied.
Steps for installing the mounting brackets
Install the mounting brackets on the
device.
Note
Required tools
You need a TORX T20 screwdriver to remove the mounting clamps and mount the mounting
brackets.
Mounting/installing the device
For dimensions of the device variants with mounting clamps see Dimension drawings of the
device with mounting brackets (Page 119).
Examples of mounting types
Material
Concrete
Plasterboard
(min. 13 mm thick)
Metal
(min. 2 mm thick)
Ensure that the wall or ceiling can hold four times the total weight of the device (including
the mounting brackets and additional expansion modules).
78
Hole diameter
8 mm diameter
60 mm depth
14 mm diameter
5 mm diameter
WARNING
Fixing
Dowel: 8 mm diameter
50 mm length
Screws: 4 mm diameter
50 mm length
Cavity fixings: 4 mm diameter
50 mm length
Metal screws M 4: 4 mm diameter
15 mm length
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012