Assembly Forms Overview - Siemens SIMOTION P320-3 Manual

Installing/Mounting

5.3 Assembly forms overview

5.3 Assembly forms overview
Various installation types are available for installing a SIMOTION P320-3.
The installation is in a distributed configuration, i.e. the panel is connected to the
SIMOTION P320-3 in different physical locations. This requires several additional
components that must be attached to the panel front or the SIMOTION P320-3.
As an alternative, the SIMOTION P320-3 can be installed without panel front (headless).
NOTICE
Securing with screws is not possible with the 12" touch screen variant.
Note
The installation and the removal of components and the mounting of the complete system
are described in detail in the SIMOTION P320-3 and Panel Fronts Commissioning and
Hardware Installation Manual.
84
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012