Table of Contents
Advertisement
Application planning
4.4 Mounting positions and fastening
4.4
Mounting positions and fastening
Requirement
NOTICE
The device is approved for operation in closed rooms only.
Ensure that there is a minimum clearance to the other components or the walls of a
housing:
Below at least 100 mm
Above at least 50 mm
Mounting positions
Table 4- 1
Mounting position
Horizontal (preferred position)
Vertical
(power supply at the top)
Suspended
72
Permissible mounting positions for the SIMOTION P320-3
Permitted temperatures / notes
in RAL: 0 to +55° C
0 to +45° C
Notes:
When mounted on a DIN rail, the device should be secured to
prevent shifting (e.g. with a DIN rail ground terminal).
See Section Mounting on DIN rails (Page 76)
0 to +40° C
Note:
Mounting brackets are required if the device is suspended.
See Section Mounting with mounting brackets (Page 77)
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
Advertisement
Table of Contents
