3.4
SIMOTION P state application
3.4.1
SIMOTION P State application overview
The LED, mode selector, and memory card handling indicators, which are implemented as
hardware on other SIMOTION platforms, are displayed in virtual form in the SIMOTION P
system.
This is achieved via the SIMOTION P state application. The following figure shows
SIMOTION P state in the started state.
Figure 3-3
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
SIMOTION P state
Hardware description
3.4 SIMOTION P state application
49