Table of Contents
Advertisement
6.7
PROFINET strain relief
The PROFINET strain relief provided in the package is used to prevent accidental loosening
of the cable from the device. One cable tie (not included in the package) is required for each
interface.
To fix the PROFINET strain relief, you will need a TORX T10 screwdriver.
Attaching the PROFINET strain relief
1
2
SIMOTION P320-3 and Panel Fronts
Manual, 02/2012
Attach the PROFINET strain relief.
Attach the cable using the cable tie.
Connecting
6.7 PROFINET strain relief
99
Advertisement
Table of Contents
