Installing The Remote User Interface Software - Fluke OptiView III Series Getting Started Manual

Installing the Remote User Interface Software

The remote user interface software can be installed on the following operating
systems:
•
Windows 2000 Professional SP4 or later
•
Windows 2000 Server SP4 or later
•
Windows 2000 Advanced Server SP4 or later
•
Windows XP Professional SP1 or later (SP1 and SP2 currently)
•
Windows 2003 Server SP1 or later
•
Windows 2003 Advanced Server SP1 or later
To install the remote user interface software from CD, insert the OptiView
Resource CD into your PC's CD drive. Autorun will execute and load the
OptiView Resource CD user interface.
TM
If autorun is disabled on your PC, execute the file Launch.exe located in the root
directory of the CD. Follow the on-screen instructions to complete the installation.
Once the installation is complete, you will be able to launch the OptiView
Browser from your desktop, select an analyzer from the OptiView Browser
TM
or enter the IP address of the analyzer, and gain access to valuable network
information through the user interface software. See figure 19.
To install the remote user interface software onto your PC, connect
the analyzer to your network and power it on. Enter the analyzer IP
address into your PC's browser URL field (omit leading zeros).
The analyzer IP address is displayed on the Front Page screen in
the OptiView button as shown to the left. The home page of the
analyzer will display as shown in Figure 20. Select the Install
Remote UI button and follow the on-screen instructions to
complete the installation.
Integrated Network Analyzer
Using the Analyzer
TM
TM
list,
35