Before You Start; Safety Information - Fluke OptiView III Series Getting Started Manual

Before You Start

Safety Information

The following symbols are used on the product and in this document:
NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
PLEASE READ MANUAL FOR SAFETY
COMPLIES WITH EUROPEAN UNION DIRECTIVE
SHOCK HAZARD
CLASS 1 LASER PRODUCT. DO NOT LOOK INTO LASER
RECYCLE LITHIUM ION BATTERIES
COMPLIES WITH CAN/CSA-C22.2 NO. 60950-1 CANADIAN
STANDARDS, AND UL 60950-1 (US STANDARDS)
DO NOT DISPOSE OF LITHIUM ION BATTERIES IN GARBAGE,
RECYCLE
MEETS AUSTRALIA EMC REQUIREMENTS
The OptiView
the "analyzer") complies with:
Class 1 Laser product 21 CFR 1040.10 & 1040.11, CFR(J)
CSA C22.2 No 950, and EN60950
To avoid possible electric shock or personal injury, follow
these guidelines:
•
Do not use this product if it is damaged. Before using
the product, inspect the case. Look for cracked or
missing plastic. Pay particular attention to the
insulation surrounding the connectors.
•
Do not operate the product around explosive gas,
vapor or dust.
Series III Integrated Network Analyzer (hereafter referred to as
TM
Warnings
1