User Account Rules - Fluke OptiView III Series Getting Started Manual

OptiView TM Series III
Getting Started Guide
By default, the following users have been pre-configured.
The default user accounts can not be deleted. They can only be disabled and
modified. As a user with administrative privileges, you may add new users and
customize your own and other user's security privileges.
OVC Import account is used by the OptiView Console application
(purchased separately). When User Accounts is enabled (password
protected), you must enable the OVC Import account with a
password. That password is used by the OptiView Console
application when importing network discovery information from the
analyzer.

User Account Rules

•
•
•
38
Figure 22. Default Users
The analyzer title bar displays the login user name,
in this example
When you exit the user interface and start up a new user interface, you
must re-login; the login is not remembered for the last successful login
The Front Page screen's remote session window
the remote user in addition to the IP address as shown below
Figure 23. Remote Sessions Screen
Note
aww83s.bmp
"admin"
displays the name of
aww64s.bmp