System Troubles; Power Mode Setup - Honeywell Tuxedo Touch User Manual

System Troubles

The "Security" screen also displays an Icon(s) if a system trouble(s) occurs. If a Trouble Icon is shown, contact your alarm
company. The following Icons may be shown as applicable to your system:
ICON
AC Loss – The system is not receiving AC power.
Bell Failure – The system bell or siren has a problem. Note: This Icon displays when interfacing with residential panels only.
Expander Failure – The system has a failure in an expansion module.
Low Battery – The system battery, that powers the system during an AC power loss, is low.
LRR Supervision Failure – The Communication Device used to communicate with the central station has a supervision failure
Max Attempts Exceeded – The system has exceeded the maximum attempts to communicate with the Central Station.
Pager Failure – The system cannot communicate with an assigned pager.
Telco-1 Cut – The system is not able to communicate with the central monitoring station over the primary phone line.
Telco-2 Cut – The system is not able to communicate with the central monitoring station over the secondary phone line.
Wireless Failure – The system is not able to communicate with its wireless devices.
Note: If multiple faults exist, press the More Choices icon and then the Show Zones icon to view and scroll through the complete list of faults.

Power Mode Setup

Power Setup Mode allows you to reduce power consumption in the event of a system trouble such as AC Loss or Panel Low
Battery. To access Power Mode Setup, from the Home screen, press the Setup icon and then do the following:
ICON
1. Press the System Setup icon.
2. Press the Power Mode Setup icon.
3. Enter your Authorized Code, if required.
4. Select Power Save Mode to enable; then
choose from the options.
5. Press Apply to save settings.
About the System (cont'd)
ACTION
FUNCTION
NOTES
Select from:
•
Turn-off Network
•
Override Display Settings: When selected, Display settings are
overwritten and the keypad operates in low power mode:
- Brightness/Volume controls decrease to minimum levels.
- Return To Homepage After time resets to 30 seconds.
- Auto SlideShow After time reverts to Never.
When AC power is restored, the original Display settings resume.
9