Mitsubishi F700 Series Instruction Manual page 150

REMARKS
 By setting "0" in Pr. 52, the monitoring of output speed to fault display can be selected in sequence by
 When the operation panel (FR-DU07) is used, the displayed units are Hz, V and A only and the others are not displayed.
 The monitor set in Pr. 52 is displayed in the third monitor position. (The output voltage monitor is changed.)
Initial value
* The monitor displayed at powering ON is the first monitor. Display the monitor you want to display on the first monitor and hold
down for 1s. (To return to the output frequency monitor, hold down
monitor.)
•
Power-ON monitor (first monitor)
Output frequency monitor
Example)When Pr. 52 is set to "20" (cumulative energization time), the monitor is displayed on the operation panel as described
below.
•
Power-ON monitor (first monitor)
Output frequency monitor
(2) Display set frequency during stop (Pr. 52)
 When Pr. 52 is set to "100", the set frequency
monitor is displayed during a stop and the output
frequency monitor is displayed during operation.
(LED of Hz flickers during stop and is lit during
running.)
When Pr.52="100", the set frequency displayed at a
stop indicates frequency to be output when the start
command is ON.
Different from the frequency setting based on
displayed when Pr. 52="5", the value maximum/
minimum frequency and frequency jump is
displayed.
REMARKS
 During an error, the output frequency at error occurrence appears.
 During MRS, the values displayed are the same as during a stop.
• S
econd monitor
Output current monitor
• S
econd monitor
Output current monitor
Output current
Output voltage
Monitor display and monitor output signal
for 1s after displaying the output frequency
•
Third monitor
With fault
Output voltage monitor
•
Third monitor
With fault
Cumulative energization time monitor
0
During
running/stop
Output Output
frequency frequency
Fault display
.
•
Fault monitor
•
Fault monitor
Pr. 52
100
During During
stop running
Set Output
frequency frequency
Output current
Output voltage
Fault display
139
4