Installing The Vsp 8200 In An Equipment Rack - Avaya 8200 Installing Manual

Installing the Avaya Virtual Services Platform 8200
4. Power cord
• The VSP 8284XSQ-AC "A" model (EC8200A01–E6) does not include a power cord for the
AC power supply. All other models include a country-specific power cord.
• The VSP 8284XSQ-DC model (EC8200001–E6) ships with a DC power supply wiring
assembly for the DC power supply.
• The VSP 8284XSQ AC PS No PC GSA model (EC8200A01–E6GS) does not include a
power cord. This model is TAA compliant.
• The VSP 8284XSQ AC PS NA PC GSA model (EC8200E01–E6GS) includes a North
American power cord. This model is also TAA compliant.
5. Four field-replaceable fan trays
6. Documentation
Note:
A 300mm-900mm slide rack mounting kit is available as an option.

Installing the VSP 8200 in an equipment rack

There are three ways to install an Avaya VSP 8200 switch in an equipment rack. Refer to one of the
following sections:
• Slide Rack Mount Kit-This is a separately ordered option that you can use to install your switch
in an equipment racks that range from 300mm to 900mm deep. For installation instructions,
see Using the optional slide rack mount kit
• Brackets-The switch comes with brackets that you can install in one of two positions on the
chassis:
- Use the mid-chassis position for a two-post rack.
- Use the front panel position of the chassis for a four-post rack.
For installation instructions, see
Before you begin
• Ensure that you have a space of 1.75 inches (4.45 centimeters) in height for each switch in an
EIA or IEC-standard 19-inch (48.2-centimeter) equipment rack.
• Ensure that there is enough rack space to accommodate a 2RU switch (8.8 cm).
• The rack is bolted to the floor and braced if necessary.
• The rack is grounded to the same grounding electrode used by the power service in the area.
The ground path must be permanent and must not exceed 1 Ohm of resistance from the rack
to the grounding electrode.
Installing the Avaya VSP 8200
18
on page 19.
Using the supplied bracket
Comments? infodev@avaya.com
on page 34.
December 2014