Cable Requirements For The Vsp 8200 - Avaya 8200 Installing Manual

Installing the Avaya Virtual Services Platform 8200
4. Insert and tighten the rack-mount screws.
5. Verify that the switch is securely fastened to the rack.
6. Connect power and network connections to the switch.

Cable requirements for the VSP 8200

The following table describes the cables required for an Avaya Virtual Services Platform 8200
switch.
Table 8: Switch cable requirements
Required Cable
10/100/1000Base TX Ports
Console Port (10101)
Installing the Avaya VSP 8200
36
Description
The interconnect cabling must conform to the Cat5e, Cat6, or Cat6e
specification of the Commercial Building Telecommunications Cabling
Standard, ANSI/TIA/EIA 568-B fitted with an RJ-45 Module jack.
Varies depending on the user device. The VSP 8200 has an RJ-45
female connector so a serial cable with an RJ-45 connector on one
end and an RJ-45 on the other is appropriate. The maximum length
for the console port cable is 25 feet (8.3 meters).
Comments? infodev@avaya.com
December 2014