Example Of A Program Set-Up - ELNA 654 Instruction Manual

1
DF
1
2
SL
2.5
3
CW
N
S
26

Example of a Program Set-up

Safety 4 Thread
Use the recommendations for the
settings found on the reference card.
NOTE:
Machine should not be threaded
before program set-up occurs.
Cut and remove all threads.
HINT:
Cut thread at looper and needle eyes
and hand pull thread away.
IMPORTANT:
Never press on foot control to sew
out thread.
IMPORTANT:
Always hand turn flywheel towards
you (counter-clockwise).
Elna recommends reading symbols from
left to right.
1. Adjust differential feed dial to 1.
2. Adjust stitch length dial to 2.5.
3. Set cutting width dial to N.