Stitch Length; Cutting Width - ELNA 654 Instruction Manual

Stitch Length

4
5
The fabric weight and fiber content may
require the SL (stitch length) to be adjusted.
Stitch length should be set between 0.5 and 4.0.
Set a shorter stitch length for lightweight or
sheer fabrics. Set a longer stitch length for
heavyweight or bulky fabrics.

Cutting Width

The stitch, the fabric weight and the number of
fabric layers may require the cutting width dial
to be adjusted. Fabric should lie flat inside the
overlock stitch without loops or tunneling.
Loops
The cutting width is set narrower than the stitch
width. Move the cutting blades to the right by
turning the cutting width dial up to a higher
number (counter-clockwise).
Tunneling
The cutting width is set wider than the stitch
width. Move the cutting blades to the left by
turning the cutting width dial down to a lower
number (clockwise).
61