Maintenance; Cleaning And Oiling - ELNA 654 Instruction Manual

SECTION VIII

Maintenance

Proper machine cleaning and oiling are
essential to ensure maximum machine
performance.

Cleaning and Oiling

Unplug the machine from the electrical
outlet. Open the front cover.
Remove the presser foot by pushing
the lever behind the needle clamp.
Loosen the screws on the needle plate
with the screwdriver and remove the
needle plate.
Disengage the movable cutting blade.
Use the brush to remove all lint and
fiber accumulation.
Place a drop of oil as indicated in
drawing. Oiling should be performed for
every 8 hours of actual sewing
operation (approximately once a month).
Reattach the needle plate.
To reattach the presser foot, place the
foot underneath the presser foot area
and lower the needle bar. The foot will
snap back into place.
67