Connecting Machine To Power Supply - ELNA 654 Instruction Manual

Connecting Machine to Power
Supply
The power switch should be off.
Before connecting the power cord/foot control,
make sure the voltage and frequency shown
on the machine are identical to your electrical
power. Insert the machine/foot control plug
into the machine and the power supply plug
into the wall.
For Your Safety
1. While the machine is in operation, always
keep your eye on the sewing area and do
not touch any moving parts - needle(s),
flywheel, movable cutting blade, loopers,
etc.
2. Always switch off the power switch
and unplug from the power supply:
when leaving the machine unattended
when attaching or removing parts
when cleaning the machine.
3. Do not place anything on the foot control.
NOTE (USA only)
Electric model 4C316B202 foot control.
16
: Use only Matsushita