Sewing; Example Of How To Read The Machine Set-Up Information; Straight Stitch; Starting To Sew - ELNA 6001 Instruction Book

PDFMAILER.DE
01
1
2
3
SECTION III

Sewing

Example of How To Read the Machine Set-Up
Information
Select Stitch
j Press 1-15 key to select stitch 01. LED readout
shows 01.
Which Presser Foot to Use
k Use presser foot shown (A: Metal foot) for the
best sewing result. See page 5 for presser foot
definitions.
Set Thread Tension
l Set thread tension to 4. See page 9.
Each stitch has a pre-programmed length and/or
width. Some techniques require other settings.
These will indicated when necessary.

Straight Stitch

When the machine is turned on, it is automatically
set to sew a straight stitch in the center needle posi-
tion.
The straight stitch is used to sew a seam in woven
fabrics. The straight stitch can also be used for gath-
ering, basting, sewing in a zipper, pintucks, rolled
hems and twin needle hems.

Starting To Sew

Raise the presser foot and position the fabric next to
a seam allowance line on the needle plate. Lower
the needle to the point where sewing is to begin.
Pull the threads under the foot towards the back and
lower the presser foot.
Press the foot control. Gently guide the fabric along
the seam allowance line letting the fabric feed natu-
rally.
22