How To Set Up Machine Using The Program Display Panel - ELNA 745 User Manual

How To Set Up Machine Using the
Program Display Panel
Turn the program selection dial and change
readout in SELECT window to program 2.
NOTE: Machine should not be threaded
before program set-up occurs. Cut and
remove all threads.
HINT: Cut thread at looper and needle eyes
and hand pull thread away.
IMPORTANT: Never press on foot control
to sew out thread.
Program display
A.
Program selection dial
B.
Program number
C.
Differential feed ratio
D.
Stitch length in mm
E.
Needle position
F.
Cutting width dial position
G.
Position of movable cutting blade
H.
2 thread converter - up/down
I.
Overlock cover or sewing table
J.
Foot lever position
K.
Position of instant rolled hem device
L.
(stitch width finger lever)
Thread chain looper tension (brown)
M.
20