Table of Contents
Advertisement
DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN 555-233-121
2
SREPN Maintenance
Maintenance procedure
Table 2-8
Table 2-8. Current and faulted hardware paths
If link is
up
down
For more information on system links and hardware paths, refer to:
3. Look for alarms on the components listed under the appropriate hardware
path. If any alarms are present, follow the maintenance procedures for the
alarmed components to clear those alarms first.
4. To help corroborate the information that you have gathered, inspect the
Release 9r Alarm and Error logs
display alarms
Port
Maintenance On
Name
01E02
SNI-PEER
01E20
SNI-CONF
PN02
EXP-PN
PN02
EXP-PN
2 A-PNC
FIBER-LK
2 A-PNC
FIBER-LK
2 A-PNC
FIBER-LK
Figure 2-14. Display alarms screen (Release 9r)
describes when the current or faulted hardware path displays.
Current hardware
path displays?
Y
N
SYS-LINK Maintenance Object in Chapter 9 of DEFINITY ECS
Release 9 Maintenance for R9r
''System links'' on page 2-43
NOTE:
Since the system is in Survive mode, the Release 9r thinks it has lost
its connections to the EPN. Therefore, alarms may be present, even
though the problem has been diagnosed and fixed.
ALARM REPORT
Alt
Brd? Name
n
MAJOR
n
MAJOR
n
MAJOR
n
MAJOR
n
MAJOR
n
MAJOR
n
MAJOR
Faulted hardware
path displays?
N
Y
(Figure
2-14).
Page
Alarm
Svc
Ack?
Type
State
1 2
03/09/00:21 00/00/00:00
03/09/00:26 00/00/00:00
03/09/00:30 00/00/00:00
03/09/00:30 00/00/00:00
03/09/00:30 00/00/00:00
03/09/00:30 00/00/00:00
03/09/00:30 00/00/00:00
Issue 2
November 2000
Focus attention on
path
current
faulted
1 of
2
SPE A
Date
Date
Alarmed
Resolved
2-20
Advertisement
Table of Contents
