Table of Contents
Advertisement
DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN 555-233-121
1
SREPN Installation
Administer the Release 9r and SRP
2. Display the hardware in the SREPN by typing display circuit-packs
<number> (the port network number of the SREPN) and pressing
3. On the SRP system, type change circuit-packs 2 and press
circuit packs displayed on the Release 9r system that are not Release 9r
specific (such as packet gateways or DS1CONV) must be added to the
SRP. Be sure to add circuit packs to all necessary carriers.
4. Press
Administering the software
1. Set the customer options on the SRP to closely match the Release 9r
options.
Identify and add trunk information
Administration for each of the circuit packs in the SREPN needs to be added to
the SRP. For every trunk circuit pack, the trunk administration must be added and
for every port on every line circuit pack, the station administration must be added.
1. On the Release 9r system, type list configuration port-network
<number> (number of the SREPN port network) and press
the slot numbers of the trunk circuit packs.
2. For each trunk circuit pack on the Release 9r system, type display port
<CCSS01> (where CCSS01 is the circuit pack and port location of the first
port on the trunk circuit pack) and press
appears. The Identification: field shows the trunk group and
member information for that port. (For example, 98/1 means that this port is
member 1 of trunk group 98.)
3. Type display trunk-group <number> (number is the trunk group member)
and press
4. On the SRP system, type add trunk-group <number> and press
5. Add all of the trunk group information (displayed on the Release 9r system)
to the SRP system.
NOTE:
The port network numbers differ between the Release 9r and the
SRP. On the Release 9r system, the port network that you may be
displaying is 5; whereas, on the SRP system, the port network that
you are adding circuit packs to is always 2.
NOTE:
Save often the information you add to the SRP system.
to effect the changes.
Enter
.
Enter
NOTE:
The port network numbers differ between the Release 9r and the
SRP. On the Release 9r system, the port network that you may be
displaying is 5; whereas, on the SRP system, the port network that
you are adding circuit packs to is always 2.
November 2000
Enter
. The Port Information screen
Enter
Issue 2
1-19
.
Enter
. All the
Enter
. Identify
.
Enter
Advertisement
Table of Contents
