DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN 555-233-121
About This Document
Standards compliance
Standards compliance
The equipment presented in this document complies with the following (as
appropriate):
ITU-T (Formerly CCITT)
ECMA
ETSI
IPNS
DPNSS
National ISDN-1
National ISDN-2
ISO-9000
LASER Product
The DEFINITY ECS may contain a Class 1 LASER device if single-mode fiber
optic cable is connected to a remote expansion port network (EPN). The laser
device operates within the following parameters:
Maximum Power Output: -5 dBm
Wavelength: 1310 nm
Mode Field Diameter: 8.8 µm
CLASS 1 LASER PRODUCT
IEC 825 1993
!
DANGER:
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Contact your Lucent Technologies representative for more information.
ANSI
FCC Part 15 and Part 68
EN55022
EN50081
EN50082
UNI 3.1
CISPR22
Australia AS3548 (AS/NZ3548)
November 2000
Australia AS3260
IEC 825
IEC950
UL 1459
UL1950
CSA C222 Number 225
TS001
ILMI 3.1
Issue 2
xvii