Table of Contents
Advertisement
DEFINITY Enterprise Communication Server Release 9
Installation and Maintenance for Survivable Remote EPN 555-233-121
2
SREPN Maintenance
SREPN connections
Faceplate switch
Table 2-4
Table 2-4. Faceplate switch positions and uses
Label
RSTR
AUTO
TEST
a.
This switch position overrides the restore survivable-remote-link command from the SAT. See
''Restore from remote location''
indicates the 3 positions for the faceplate switch and the use for each.
Position
Use
Top
Forces control to the Release 9r by switching from Survive mode
to Normal mode
Middle
Ready to go into Survive mode. The switch should be in this
position except during installation, testing, or releasing the SRP
from Survive mode.
Bottom
Forces control to the SRP (Survive mode). Links to the SREPN
are through the SRP (TN2404 Processor).
!
CAUTION:
This is for installation and testing only. Do not leave the
switch in this position.
later in this chapter for more information.
a
Issue 2
November 2000
2-8
1
Advertisement
Table of Contents
