Bailey ADVANCE 2019 Owner's Manual page 167

Closing The Fiamma Awning
1. When the awning is open a safety flag, as
indicated by the circle, is visible. This flag is
usually red plastic.
2. When the awning is about to fully close or if
the awning is not closed correctly the red flag
will still be visible.
3. When the awning is closed fully and
correctly the flag will no longer be visible.
Maintenance
Make sure that your awning is completely dry
and clean before closing it. The remaining
humidity could cause stains. If however you
have no choice but closing the awning when
it is still wet, make sure to open it for drying
within 12 hours maximum. If most of the dirt is
superficial it can be removed with clean water
and a cloth or a brush. If the fabric is very
dirty, add some light cleaning detergent. Be
aware never to use any aggressive chemical
substances and never clean the fabric with a
high pressure machine. We recommend not to
use the awning at a temperature below 0°C.
• To guarantee a perfect quality, the fabrics
are waxed or laminated several times.
• During this operation, single coloured
pigments could move and thus create small
bright spots in the material, which are only
irregularities that are technically inevitable,
but do not influence the impermeability of
the fabric. The fabric is therefore completely
sealed, including in these spots.
• During the production of the material, small
creases could form, which especially on
bright fabric in backlight could seem dark.
Bright stripes (the so called white crease)
are inevitable with these materials.
• With time the influence of weather could
cause change in colour.
• All Fiamma fabrics are soldered on the front
bar for a high resistance to water. In case
of rain little drops of water may form near
the front bar and this may happen when
the awning is open as well. This doesn't
compromise the awning's functionality.
For further information please download the
full Fiamma manual at www.fiamma.com
163