Operation Procedure; Controls; Weight Defrosting - Bailey ADVANCE 2019 Owner's Manual

o p
perating rocedure
1. Plug power supply cord into 230V AC
50Hz power outlet.
2. Press Eco button until beep sounds and
display is turned on.
3. After placing the food in a suitable
container, open the oven door and put it
on the glass tray. The glass tray and roller
guide must always be in place during
cooking.
4. Close the door.
5. The oven door can be opened at any time
during operation by pushing the door open
button. The oven will automatically shut
off.
6. The oven automatically cooks on full
power unless set to a lower power level.
7. The display will show " : 0" when the oven
is plugged in, press and hold Eco button
until display is turned on and beep sounds.
8. Display will be returned to the " : 0 " when
the cooking time ends.
9. When the STOP/CLEAR button is pushed
during the oven operation, the oven stops
cooking and all information is retained.
To erase all information, push the STOP/
CLEAR button once more. If the oven door
is opened during the oven operation, all
information is retained.
10. If the START button is pushed and the
oven does not operate, check the area
between the door and door seal for
obstructions and make sure the door is
closed securely. The oven will not start
cooking until the door is completely closed
or the program has been reset.
11. Display turns off after 10 minutes.
c
ontrolS
When the oven is first plugged in the
display will show nothing.
1. Press and hold the Eco button until display
is turned on and the beep sounds. The
oven is turned to AC power on.
2. Press and hold the STOP/CLEAR button
until display is turned off. The oven is
turned off and will use no power.
If the mains power goes off, the
display disappears until the power
comes back on and the Eco button is
pressed and held until a beep sounds.
The oven is automatically powered off when
not used for a period of 10 minutes or more.
w d
eight efroSting
When WEIGHT DEFROST is selected, the
automatic cycle divides the defrosting time
into periods of alternating defrost and stand
times by cycling on and off.
1. Push the WEIGHT DEFROST button - the
display will show you "0".
2. Push the TIME SET buttons for inputting
the desired weights - the display will show
you what you selected.
3. Push the START button.
Your oven can be programmed for
200g~3000g in weight defrosting
mode.
The defrosting time is automatically
determined by the weight input. When you
push the START button, the display counts
down the time to show you how much
defrosting time is left. The oven beeps during
the defrosting cycle to signal that the food
needs to be turned over or rearranged. When
the defrosting ends, you will hear 3 beeps.
Time Defrosting
When TIME DEFROST is selected, the
automatic cycle divides the defrosting time
into periods of alternating defrost and stand
times by cycling on and off.
105