Bailey ADVANCE 2019 Owner's Manual page 11

Figure 3
Base Plate Number and
AL-KO AMC Chassis Plate
Motorhome Model Information
All motorhomes are Peugeot based models
built on an AL-KO chassis, classed as a
coach-built motorhome made with insulated
laminated panels with a GRP outer skin.
(Type Approval class M1 SA).
AL-KO AMC Chassis
Your vehicle is fitted with an AMC Chassis
Conversion supplied and fitted by AL-KO Kober
Limited. As a result the base vehicle has
undergone certain changes. The original
rear frame has been replaced by a hot-dip
galvanised AL-KO lightweight chassis. This
chassis is connected to the cab by means of a
special bracket assembly. The AL-KO chassis
and AL-KO axle with torsion bar suspension is
fitted in place of the original manufacturer's
chassis and axle.
Repairs to the AL-KO AMC components
including the axle assembly must only be
carried out by specialist workshops.
Tow Bar
Vehicles with an AL-KO chassis are approved
for use with a trailer. If fitting a tow bar always
use one that has been approved by AL-KO and
ensure it is fitted correctly.
When ordering a tow bar assembly always
indicate the vehicle type and VIN.
You should ensure that the maximum train
weight as shown in the registration documents
VIN
Statutory Plate
(Gas Box)
and on the statutory plate is not exceeded.
Suitable rear view mirrors in accordance with
road traffic regulations may have to be fitted.
Wheels
In the event of a puncture, ensure that the
replacement tyre is of the same construction
and size as the one that is being removed. The
tyre pressures must be suitable.
7