Bailey ADVANCE 2019 Owner's Manual page 121

6) Turn the "TIMER/WEIGHT/AUTO MENU"
dial to adjust the cooking time to 7 minutes; 7)
Press the "START/+30SEC/CONFIRM button to
start the cooking process.
p -
re Set time to Start functionS
Set the clock first. (Consult the instructions for
setting the clock) Input the cooking program.
It's possible to input a maximum of 2 cooking
stages. Do not use the defrost function in the
pre-set function. The auto menu can be set for
a single stage only.
Example: if you want to cook with 80%
microwave power for 7 minutes, to start at a
given time.
1)Press the "POWER" button once;
2)Turn the "TIMER/WEIGHT/AUTO MENU" dial
to choose 80% microwave power till "P80" is
displayed;
3)Press "START/+30SEC/CONFIRM" button to
confirm;
4)Turn the "TIMER/WEIGHT/AUTO MENU" dial
to adjust the cooking time to 7 minutes;
5)After the above steps, DO NOT press "
START/+30SEC/CONFIRM " button, but do as
follows :
6)Press the "CLOCK/PRE-SET" button, the
current time displays and the hour figures
flash.
7)Turn "TIMER/WEIGHT/AUTO MENU" dial to
adjust the hours, the input should be within
0-23. Press "CLOCK/PRE-SET" button and the
minute figures will flash. Turn the "TIMER/
WEIGHT/AUTO MENU" dial to adjust the
minutes, the input time should be within 0- 59.
This sets the start time.
8)Press "START/+30SEC/CONFIRM" to finish
setting.
The ":" will illuminate, the buzzer will ring
twice when the time to start arrives, and then
cooking will start automatically.
The clock must be set first. Otherwise,
the pre-set function will not work.
a m
uto enu
The microwave can automatically calculate the
cooking time based on the type of food and
weight.
1)Turn the "TIMER/WEIGHT/ AUTO MENU"
dial clockwise, "A-1" will display on the screen.
Continue to rotate the dial to access the other
auto selections, up to A-8.
2)Press the "START/+30SEC/CONFIRM" button
to select the chosen auto, A-1 - A-8.
3)Turn the "TIMER/WEIGHT/AUTO MENU" dial
to choose the food weight, these are pre-set
and listed below.
4)Press "START/+30SEC/CONFIRM" button to
start cooking. Please see the table below for
the various settings.
In all cases allow the food to stand in the
microwave for 1-2 minutes after the cooking
cycle is complete.
c f
hecking unctionS
1)During the cooking cycle, press the "POWER"
button and the current power will be displayed
for 2-3 seconds.
2)In pre-set state, press the "CLOCK/PRE-SET"
button to check the time when the cooking
will start. The pre-set time will flash for 2-3
seconds, then the oven will turn back to the
clock display.
3)During the cooking cycle, press the "CLOCK/
PRE-SET" button to check the current time. It
will be displayed for 2-3 seconds.
c
hild lock
Lock on: In standby, when nothing is operating,
Press "STOP/CLEAR" button for 3 seconds,
there will be a long "beep" as the lock
activates. A rectangle will illuminate in the
display.
117