Table 3.1 Fans; Table 3.2 Power Supply Units - Fujitsu GP 7000F Manual

CHAPTER 4 M400A Main Cabinet
Panel cover
Fans
Power supplies
44
The panel cover can be opened from its right side after unlocking it. Then you can access switches
on the operator panel, CD-ROM unit, Floppy drive unit, tape unit, and so on.
The Table 4.1 lists the fans installed in the M400A main cabinet.
Name Tray #
Fan #0 Tray #04
Fan #1
Fan #3 Tray #01
Fan #4 Tray #02
Fan #5
Fan #10 Tray #05
Fan #11
Fan #12 Tray #06
Fan #13
Fan #14 Tray #07
Fan #15
Fan #16 Tray #08
Fan #17
Fan #18 Tray #09
Fan #19
Fan #20 Tray #10
Fan #21
The M400A main cabinet has 2 kinds of power supply units as well as DDC (DC-DC Converter).
FEP (Front End Bulk Power) unit has AC input, and provide +48V(to BE). BE (Back End Power)
has +48V input, and provide +12V or +5V or +3.3V to some internal components. The power
supplies must be configured according to the system hardware configuration as described in
Table 4.2 .
Table 4.2
Without an Expansion
Standard
FEP
BE(5V)
BE(3.5V)
Table 4.1 Fans
Location
Right (front view) of the cabinet
Center (front view) of the cabinet
Left (front view) of the cabinet
Bottom (rear view) of the cabinet
Upper (rear view) of the cabinet
Above the processer module
Side the PCI slot
Above the processer module (System expansion unit)
Side the PCI slot (System expansion unit)
Power Supply Units
With an Expansion
System Board System Board
Redundant Standard
2 3
3 4
2 3
Redundant
3 4
5 6
3 4