Figure 11.3 Cd-Rom Unit Front Panel; Cd-Rom Unit - Fujitsu GP 7000F Manual

CHAPTER 11 Input-Output Units

11.3 CD-ROM Unit

Front Panel
Installing a CD-ROM disk
126
A headphone jack is installed on the front panel, so the CD-ROM unit can also be used to enjoy
music. To play music on the CD-ROM unit, install the appropriate software driver to support the
audio function.
5 Headphone terminal
Figure 11.3
1 BUSY LED
Green LED lights when the CD-ROM is accessed
2 Tray
Used to mount a CD-ROM.
3 Eject button
Press this button to open and close the tray.
4 Volume control
When using headphones, use this dial to control the sound volume.
5 Headphone terminal
Connect headphone's mini-plug to this jack.
To use headphones, sound software is required. Check the software support.
IMPORTANT
The SCSI ID of the CD-ROM unit is set to 4.
1
When the system is powered on, check that the BUSY LED on the CD-ROM unit doesn't light.
2
Pressing the Eject button, the tray comes out.
3
Place the CD-ROM disk on the tray.
4
Press the Eject button. The tray goes in, and the disk is mounted in the drive.
2 Tray
1 BUSY LED
4 Sound volume
adjustment knob
CD-ROM Unit Front Panel
3 Eject button