Fujitsu GP 7000F Manual page 173

Appearance of the Cleaning Cartridge
Figure 11.12 shows the appearance of the cleaning cartridge.
Figure 11.12
Replacing the cleaning cartridge
Figure 11.13 Cleaning Cartridge of The 8-mm Tape Unit
The tape in the cleaning cartridge is wound onto the right reel from the left reel (as shown in the
figure above) each time the magnetic head is cleaned. The used portion of the tape is not rewound.
When the entire length of the cleaning tape on the left reel is used up, the cleaning cassette can no
longer be used.
Replace the cleaning cartridge with a new cartridge when there is no more tape on the left reel. Use
either another Fujitsu labeled cleaning cartridge or an Exabyte "Premium Cleaning Cartridge"
IMPORTANT
When handling the cleaning cartridge, note the following items:
 Use the cleaning cartridge in the operating environment of the 8-mm tape unit.
 Do not allow condensation to form inside the cleaning cartridge.
 Do not subject the cleaning cartridge to strong shock. Do not open the cleaning
cartridge.
The dimensions are the same as
those of the data cartridge.
Cleaning Cartridge of The 8-mm Tape Unit
11.6 8-mm Tape Unit
Check sheet
139