Figure 7.4 Rear View Of M600R Main Cabinet; Table 7.2 Power Supply Units - Fujitsu GP 7000F Manual

Power supplies
The M600R main cabinet has 2 kinds of power supply units as well as DDC (DC-DC Converter)
dedicated each processor module. FEP (Front End Bulk Power) unit has AC input, and provide
+45V(to PPU) and +5V(to SCF). PPU (Power Processing Unit) has +45V input, and provide +12V
or +5V or +3.3V or +2V to some internal components. The power supplies must be configured
according to the system hardware configuration as described in Table 7.2 .
FEP
PPU2
PPU3
PPU3-io
PPU5
PPU12
Note:
Rear of the M600R main cabinet
AC input, AC main line switch, power supplies (FEP) and some connectors are located on the rear
of the M600R main cabinet as shown in the Figure 7.4
RS232C(Port A)
RS232C(Port B)
Power Control
Parallel(AT Centronecs)
Keyboard
100BASE-TX
AC Power Input
AC Main Line Switch
Table 7.2 Power Supply Units
1 2 3
2
2
In the Table 7.2 above, ( ) indicate additional power supply unit #.
UPS
RCI
FEP#0
Figure 7.4 Rear View of M600R Main Cabinet
Number of CPUs
4 5 6 7
3(FEP#2)
1
3(PPU#2)
1
1
2
FEP#1
7.2 Device Configuration
8
PCIslot#1
PCIslot#2
PCIslot#3
PCIslot#4
PCIslot#5
PCIslot#6
PCIslot#7
PCIslot#8
PCIslot#9
PCIslot#10
PCIslot#11
PCIslot#12
85