Fujitsu GP 7000F Manual page 10

Teleservice
2.2.3 TC20 or T100
Use of these terminals is intended as a migration solution only.
GP 7000F
system
i
2.3 Teleservice
The teleservice modem has to be connected via V.24 to the system board. The modem has
to be ordered separately owing to national variants.
If a LAN console is used, connection of the modem is to the LAN console PC. Thus one
teleservice port serves all connected servers.
8
V.24 (A)
V.24 (B)
10/100 Mbit Eth
Keyboard/mouse
When operating with the LAN console, TC20 or T100 it is not possible to access the
Open Boot PROM using the BREAK signal.
Teleservice
preferably
Console connections to GP 7000F
α α α α
console
U42335-J-Z775-1-76