Fujitsu GP 7000F Manual page 20

The following are cautions found in this manual. They have been compiled here with corresponding page
references.
CAUTION
viii
A hazardous situation could result in minor or moderate personal injury if the
user does not perform the procedure correctly. Also, damage to the product or
other property may occur.
Task
Normal Operation
System Installation
Terminal break command
Power Off
Normal Operation
Important Warnings
Warning
Data destruction: Pressing the RESET switch while the
system is running may destroy data.
Be sure to install software packages from "Basic Software
Extension" or "Enhanced Support Facility. Otherwise, above
switch functions or proper messages on LCD panel are not
guaranteed.
If used improper commands at the ok prompt, the GP7000F
may be destroyed. If you need to used any other commands
except shown on this manual, you should well understand
the function and usage of the command before using it.
Be sure to eject backup tape media and any diskettes before
power-off the system, if the media are installed. Other
wise, the data on the media may be destroyed.
Except in an emergency, never turn off the AC switch or
disconnect the power cable wile the GP7000F main cabinet is
turned on. If you do, data in the disk drive may be
destroyed.