Assembly Of Mounting Kit With Thread; Mounting Kit Without Stroke Limiter; Mounting Kit With Stroke Limiter - GEM 1230 Installation, Operating And Maintenance Instructions

4.2 Assembly of mounting kit
with thread
4.2.1 Mounting kit without
stroke limiter
Screw in adapter D using wrench
G
surface E.
Screw in guide piece F using the wrench
G
surface.
1230
4.2.2 Mounting kit with
stroke limiter
E
I
E
J
K
D
D
Screw in adapter D using wrench
G
surface E.
Set stroke limiter to the desired height
G
using wrench surface I.
Fix nut J against the actuator top.
G
Only use O-ring seal K when installing
G
stroke limiters for control functions
F
2 and 3.
20 / 32